We prefer print-ready single page PDF ( Portable Document Format ) files with the outlined fonts. You may also send the file in the following types: jpg, jpeg, psd, tif, tiff, eps, ai, and png. These files are easier to handle and will likely speed up your turn-around. Remember to add crop marks (.125″ offset) & Bleed (.125″). flatten your files before uploading. Please Beware that Word Doc files to reflow.
When using Indesign to export your pdf files, please use the setting below
Bleed is printing that goes beyond the edge of where the sheet will be trimmed off. The bleed is the part on the side of a document that gives the printer a small amount of space to account for “printer bounce” movement of the paper, and design inconsistencies when cutting the order to final size. Failing to provide bleed and crop marks can result in finished pieces showing a thin area of white on the edge. A standard US bleed is 0.125″, or 1/8 of an inch.
Safety is the area inside your document where all important text and images are situated at least 1/8″ from the final trim size. Any elements outside the ‘safe’ area are at risk of being cut into when the printed items are trimmed due to possible variations in the trim position.
Rich black is mixture of solid black, 100% K, with additional CMY values. We recommend using: C-60 M-40 Y-40 K-100 This will result in a darker tone rich looking black then black alone. If you print black alone as 100% K, the resulting black may not be as dark as you may like.
Always start and finish your designs in CMYK ( 4-color process ) color mode. Your document Color mode should also be set up in CMYK to avoid variations in the printing. Please note that you may see shifts in color when converting RGB color mode to CMYK.
We do NOT recommend borders. However if you believe it’s necessary than we suggest your border be 1/4” from the the cut line ( Edge ). If your border is too close to the cut line, there is a risk that a part of the boarder can get cut off or look uneven as there may be a shift of up to 1/8″ when cutting / printing.
Yes. We request 2 sided jobs be submitted as a multiple page pdf.
If there is an issue with your order please contact us immediately of receiving your order at email@example.com. Please be as descriptive as possible and please include any pictures that clearly depict the issue. We may request that you return the entire order before we can issue any refunds or reprints, especially if the issue stems from our end of production. This would include the wrong size, wrong shape, wrong product, wrong paper, etc. Once you send in the complaint someone will reach out to further address the issue.